With the Radial Engineering BT-Pro V2, you can stream audio from smartphones, tablets, and mobile devices to professional audio playback systems over Bluetooth. This is a DI box that accepts Bluetooth at the input, and outputs to two XLR connections for stereo signal, or one 3.5mm TRS termination for headphones.
The unit has been constructed for durability in its hardware, and for fidelity in its audio path. Its outer shell is fashioned out of 14-gauge steel. Its reception range is bolstered up to 100' thanks to a plastic injection-molded insert, which enables wireless audio to pass through unencumbered.
A level control is present at the XLR balanced outs for volume adjustments. You can switch the unit into mono if need be. A power supply is included, but you can also power the BT-Pro V2 via 48V phantom power from mixers and PAs, making the included PSU a redundant backup system.
Key Features at a Glance
- With 48V phantom power, the BT-Pro V2 provides mic-level signals at the XLR outputs
- When the external power supply is used, it is capable of generating line-level signals that can be connected to the line inputs of a PA console and avoid using additional mic-level channels.
- Each individual BT-Pro V2 has a unique Bluetooth identifier, allowing multiple units to be successfully used in close proximity to one another. This makes it easy for commercial multiroom facilities to employ a number of units without any confusion when trying to connect to a receiver in a specific part of the building.
- Power the unit via its USB-C input and the included power supply.
Radial Engineering R800 1057 Specs
Audio Circuit Type | Bluetooth A2DP Transceiver with Audio Line Drive |
Frequency Response | 20 Hz to 20 kHz |
Dynamic Range | 90 dB |
Total Harmonic Distortion | 0.05% |
Output Impedance | 150 Ohms |
Signal to Noise Ratio | 90 dB |
Bluetooth Version | Bluetooth 5.0 |
Data Compression Method | SBC Codec, All Bluetooth A2DP Compliant Devices |
Controls | Mono Sum, Ground Lift, Level Control, Headphone |
Connections | Input: Bluetooth 5.0, Device Range up to 100' Output: 2 x XLR (Male), 1/8" / 3.5 mm TRS (for Headphones) |
Construction | 14-Gauge Steel Outer Shell, Molded Nylon Insert |
Finish | Durable Powder Coat |
Dimensions (L x W x D) | 3.3 x 5 X 2 " / 84 x 127 x 51 mm |
Weight | 1.1 lb / 500 g |
Package Weight | 1.565 lb |
Box Dimensions (LxWxH) | 11.8 x 5.1 x 2.6" |