4-Channel High-Performance Amplifier Platform with DSP and Dante

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

The T Series is Powersoft's newest addition to its touring line of amplifier platforms, designed to deliver cost-effective, high-quality performance loudspeaker processing. Available in both 4-channel and 2-channel, both versions support channel powers from 750 W to 3,000 W.

In addition to analog, the T Series includes AES3 and Dante by Audinate inputs, which are optimized for daisy-chained distribution of 2-channel audio to multiple amplifiers with no need for external switches or splitters. The T Series also allows remote control and advanced signal processing abilities through Powersoft's ArmoníaPlus, plus onboard DSP.

General

• Number of channels: 4
• Output power: Single channel mode: Bridge mode
• 2 Ω: 4 Ω: 8 Ω: 4 Ω: 8 Ω
• 1500 W: 1500 W: 1250 W: 3000W: 3000W
• Max output voltage / current: 145 Vpeak: / 50 Apeak
• AC Main Power
• Power supply: Universal, regulated switch mode
• Nominal power requirement: 100-240 V ±10%, 50-60 Hz
• Operating voltage: 90 V - 264 V
• Power consuption**: 115 V: 230 V
• Idle: 32 W: 32 W
• 1/8 of max output power @ 4 Ω: 1054 W: 9.5 A: 1027 W: 5.2 A
• Thermal
• Operating temperature range: 0º - 45º C - 32º - 113º F
• Thermal dissipation**: 115 V: 230 V
• 1/8 of max output power @ 4 Ω: 1039 BTU/h: 261.8 kcal/h: 944 BTU/h: 237.9 kcal/h
• AUDIO
• Gain: 32dB
• Input sensitivity: 2.57 Vrms
• Max input level: 24 dBu
• Frequency response: 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
• S/N ratio: > 110 dB (20 Hz - 20 kHz, A weighted)
• Crosstalk separation: < -70 dB @ 1kHz
• THD+N: < 0.1% (typical < 0.5%)
• IMD: < 0.1% (typical < 0.5%)
• Input impedance: 20 kΩ balanced
• DSP
• AD Converter: 24 Bit Tandem @ 48 kHz 125 dB-A Dynamic Range - 0.005% THD+N
• DA Converter: 224 Bit Tandem @ 48 kHz 125 dB-A Dynamic Range - 0.003% THD+N
• Memory/presets: 256 MB (RAM) plus 512 MB flash for presets: /
• Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
• Crossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
• Delay: 2 s (input) + 100 ms (output) for time alignment
• Limiters: TruePower, RMS voltage, RMS current, Peak limiter
• Damping control: Active DampingControl and LiveImpedance measurement
• Front panel
• Indicators and Controllers: 8 x Push-button - Setting operating parameters
• 1 x Display - Settings and monitoring
• 1 x Power switch -
• Connectors
• AC main: 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
• Audio signal input: 4 x XLR - Signal input
• Loudspeakers: 2 x speakON - Neutrik NL4MD
• Network/data: 1 x Rj45 socket - RS485 data connection (non-DSP version)
• 1 x Rj45 socket - DANTE
• Construction
• Dimensions (L x H x W): 484 mm x 44.5 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
• Weight: 7.5 kg (16.5 lb)