Equipped with a black metal housing and silver contacts, the Neutrik NC3FRX-BAG RX Series XLR 3-pin female cable connector is the right-angle version of the XX Series connectors. Thanks to a slew of enhancements, including selectable cable-outlet positions, improved chuck-type strain relief, and a special boot design, this cable connector offers reliability and ease of assembly as well as low contact resistance and high integrity.
Extra-slim right-angle connector
Five selectable cable-outlet positions
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact-mating area
Female connector with improved solid metal latch that is large and easy to handle
Additional ground-spring contacts for better shell-ground continuity
Improved chuck-type strain relief provides high pull-out force and makes assembly easy and fast
Boot with polyurethane gland gives high protection to cable-bending stresses
Colored rings and boots available for coding or identification
Sleek and ergonomic design makes it valuable and handy
Neutrik NC3FRX-BAG Specs
Electrical
| Capacitance | Between Contacts: ≤4 pF |
| Contact Resistance | Inner: ≤3 Megohms |
| Dielectric Strength | 1.5 kVDC |
| Insulation Resistance | Initial: >2 Gigohms |
| Rated Current Per Contact | 16 A |
| Rated Voltage | 50 V |
Mechanical
| Cable Diameter | Outer Diameter: 0.14 to 0.32" / 3.5 to 8 mm |
| Insertion Force | ≤20 N |
| Withdrawal Force | ≤20 N |
| Lifetime | >1,000 Mating Cycles |
| Wire Size | 0.1 in² / 2.5 mm² 14 AWG |
| Wiring | Solder Contacts |
| Locking Device | Latch Lock |
Material
| Boot | Polyurethane |
| Contact Plating | 2 µm Ag |
| Contacts | Bronze (CuSn8) |
| Insert | Polyamide (PA 6.6 30 % GR) |
| Locking Element | Zinc Die-Cast (ZnAl4Cu1) / Ck 67 (Spring) |
| Shell | Zinc Die-Cast (ZnAl4Cu1) |
| Shell Plating | Black Chromium |
| Strain Relief | Polyacetal (POM) |
Environmental
| Flammability | UL 94 HB |
| Standard Compliance | IEC 61076-2-103 |
| Protection Class | IP40 |
| Solderability | Complies with IEC 68-2-20 |
| Temperature Range | -22 to 176°F / -30 to 80°C |
| Dimensions | 2.9 x 1.6 x 0.6" / 72.9 x 41 x 15.8 mm |
Packaging Info
| Package Weight | 0.115 lb |
| Box Dimensions (LxWxH) | 3.7 x 2.65 x 1.05" |
