Designed to deliver high-quality audio, the 12" JBL EON612 is a highly flexible, easy to use, 1000W powered portable PA speaker for today's working musicians, singer/songwriters, mobile DJs, and other sound providers.
The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, the EON612 is well equipped to cover an audience of up to 300.
A push button on the back of the speaker allows you to physically switch between four different modes: Main, Monitor, Speech, and Sub for incorporating a dedicated subwoofer to extended low-end performance. There is also a built-in EQ, which is available via the Bluetooth control application for iOS and Android devices.
Two mono inputs, each with a combo mic/line XLR-1/4" connector, feature individual signal gain knobs and a master volume knob for the overall level. The two mono inputs are mixed to a mono signal internally, while an XLR loop-thru allows you to route the signal to an additional EON600-series speaker for extending the mono signal for better coverage. For a true stereo L/R operation, two EONs are needed with each to receive independent left and right signals respectively.
The highly efficient 1000W Class-D amplifier powers the 12" woofer and 1" compression driver, which provide full-range audio (57 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. JBL's proprietary Image Control Waveguide offers a 100 x 60° (HxV) coverage pattern and is designed to deliver a more consistent sound to the audience, while keeping the audio off the ceiling and walls. The EON612 includes a power cord.
At a Glance
- System type: self-powered 12”, two-way, bass-reflex
- Lightweight, rugged polypropylene enclosure can withstand the rigors of on-the-road wear and tear
- JBL premium transducers: high-quality 12" woofer and 1" compression driver are designed for the EON Series
- 1000W highly efficient Class-D amplification is matched to power the JBL transducers
- Maximum SPL output: 126 dB provides coverage of up to 300 people
- Wide frequency response (57 Hz to 20 kHz ±3 dB) delivers full-range audio performance for an accurate representation of the source material
- 100 H x 60° V coverage pattern keeps the sound on the audience and off the walls and ceiling
- Standard 35mm pole cup with stabilizing screw for use with speaker stands and speaker poles
Wireless Bluetooth Control over DSP
- Built-in DSP processor with Bluetooth v.4 control through an iOS or Android control application EON600 app
- Wireless control over the speaker's 3-band parametric EQ, high- / low-EQ, saving and recalling presets, and adjusting the master volume
- Control up to 4 EON speakers with the EON600 app
- Disable the speaker's front LED indicator light
- Fine tune the speaker in different acoustic environments
JBL Engineered Presets for Quick and Easy Setup
- Main:
- Use this setting when your EON612 is being used either on a tripod or pole and facing towards your audience
- Monitor:
- Use this setting when your EON612 loudspeaker is being used as a stage monitor facing towards you
- Sub:
- Use this setting when your EON612 loudspeaker is being used in conjunction with a separate subwoofer. This preset enables a High-Pass Filter (HPF) set at 100 Hz
- Speech:
- Use this setting when your EON612 loudspeaker is being used for Speech-only or Spoken Word-only applications and is facing towards the audience
Flexible Applications and Configurations
- Floor Monitor
- Use on its side
- Use vertically
- Main PA
- Suspended from above
- Placed on a tripod stand
- Placed on a pole mount on top of a subwoofer
- Stacked on top of one another using its molded index feet
JBL EON612 Specs
PA SpeakerConfiguration Active 2-Way Enclosure Type Bass-Reflex Loudspeaker Total Power Capacity 1000 W Peak
500 W ProgramAmplifier Power Rating LF:
700 W Peak
350 W Program
HF:
300 W Peak
150 W ProgramAmplifier Class Class-D DriversHF Driver 1 x 1" / 25.4 mm Horn-Loaded Polymer Compression Driver LF Driver 1 x 12" / 304.8 mm Woofer Magnet HF:
NeodymiumPerformanceFrequency Range 48 Hz to 20 kHz -10 dB Frequency Response 57 Hz to 20 kHz ±3 dB Maximum SPL 126 dB Coverage Angle 100° H x 60° V Max Input Level Mic Input:
-4 dBu (Balanced)
Line Input:
+14 dBu (Balanced)Gain Range Line Input:
0 to 26.8 dBu
Mic Input:
0 to 29 dBuI/O Impedance Input:
20 Kilohms (Balanced)ConnectivityAudio I/O 2 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Mic/Line Input
1 x XLR 3-Pin Male Balanced Line ThruWireless Connectivity Bluetooth Signal ProcessingCrossover 1.8 kHz EQ 3 x Presets (User)
1 x LF Shelf
1 x HF ShelfParametric EQ Yes Digital Signal Processing Voicing Modes PowerAC Input Power Universal:
100 to 240 VAC, 50 / 60 HzAC Power Connector 1 x IEC Input Current Consumption 120 VAC:
1.14 A (1/8 Power)
1.71 A (1/4 Power)
2.03 A (1/3 Power)PhysicalMounting 1 x 1.38" / 35 mm Pole Socket (Bottom)
3 x M10 Fly Point (Rear, Top)Handles 4 Construction Material Perforated Metal Grille, Polypropylene Dimensions 26.1 x 15 x 12.4" / 66.3 x 38.1 x 31.5 cm Weight 33 lb / 15 kg Packaging InfoPackage Weight 40 lb Box Dimensions (LxWxH) 29 x 16 x 14"
